Fitting The Bowl; Fitting The Accessories - MAGIMIX Mini Plus Instructions For Use Manual

FITTING THE BOWL

Wash all the parts thoroughly (except the motor unit) before using for the first time.
1
Place the bowl on the motor unit with
the handle to the left hand side.
3
Place the chosen attachment in the bowl
(see details on following page).
5
Turn the lid anti-clockwise until locks
into place. The feed tube will now be
in the centre, in line with the handle.
6
2
Turn the bowl anti-clockwise making
sure it firmly locks into position. The
handle will now be at the centre of the
motor unit.
4
Place the lid on top of the main bowl,
placing the feed tube to the left of the
handle.
W A R N I N G
Double failsafe : the machine will
only work if both the bowl and the
lid are correctly locked into position
STAINLESS STEEL MAIN BLADE: place the
blade directly in the main bowl, over the
motor shaft.
Put the lid on, and lock into position.
TO SLICE: place the disc with its slicing
blade facing upwards.
DISCS: place the selected disc on
the support, turning it gently in an
anti-clockwise direction.
Please be careful when handling the blades and disc as they are
!
extremely sharp.

FITTING THE ACCESSORIES

m
BLENDER IX: for use with the main
blade. For small quantities place it in the
bowl otherwise position it in the lid.
TO GRATE: Place the disc with its grating
blades facing upwards.
Lower the support, fitted with a disc, onto
the motor shaft in the centre of the bowl.
Put the lid on and lock into position.
7