Page 2
The configuration for the Axon D2i is organized into the following key sections: D2i Controls Axiom Device D2i Controls Mic/Line inputs Phantom Power Allows the user to adjust phantom power states for the corresponding inputs. Preamp Gain...
Page 3
Allows the user to adjust gain states for the corresponding input. Gain settings are between -8 and 34dB. Mute Control Allows the user to mute/unmute the corresponding input. Axiom In/Out In/Out Displays signal presence from a connected Axiom device. Mute Control Allows the user to mute/unmute the corresponding input/output.
Page 4
Enable Status LEDs Allows the user to enable/disable the status LEDs on the front of the D2i. Network Settings Multicast Control Response Allows the D2i to transmit asynchronous control messages triggered by “Set” type commands to a configured multicast address and port. ...
Need help?
Do you have a question about the ATTEROTECH Axon D2i and is the answer not in the manual?
Questions and answers