Synapse D32Mi Attero Tech by QSC User Manual IMPORTANT SAFETY INSTRUCTIONS The symbols below are internationally accepted symbols that warn of potential hazards with electrical products. This symbol, wherever it appears, alerts you to the presence of un-insulated dangerous voltage inside the enclosure -- voltage that may be sufficient to constitute a risk of shock.
User Manual WARRANTY INFORMATION For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and EN55022. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Synapse D32Mi Attero Tech by QSC User Manual 1 – Overview The Synapse D32Mi is a high performance, high channel density On the network side, there is a fully redundant Dante™ interface networked audio interface supporting Dante™ with AES67 utilizing both RJ45 connectors and SFP ports. The SFP ports allow interoperability.
Page 6
Synapse D32Mi Attero Tech by QSC User Manual DB-25 Option Terminal Block Option DEVICE FEATURES REAR PANEL FRONT PANEL 1 – Headphone Jack 9 – Bank A (Inputs 1-16) 2 – Headphone Mute Indicator 10 – Bank B (Inputs 17-32) 3 –...
Synapse D32Mi Attero Tech by QSC User Manual 2 – Device Installation 2.2.1 – Balanced to Balanced Wiring 2.1 – Mounting The case for the D32Mi is designed ready to fit in a standard 19” rack. The rack mount tabs are built in to the front panel of the unit (rack screws are not supplied).
Synapse D32Mi Attero Tech by QSC User Manual 2.2.3 – DB25 Pin-Out Configuration As setup needs may vary by product, it may also be necessary to check with the AES67-enabled product manufacturer as well. For devices using DB25 connectors, the TASCAM standard is used for the pin-out configuration as shown below.
Synapse D32Mi Attero Tech by QSC User Manual *Note: The connections to the primary and secondary Dante™ For full flexibility in a standalone network, the D32Mi should be networks don’t have to use the same type of port on the D16Mio.
Synapse D32Mi Attero Tech by QSC User Manual 3 – Device Operation 3.1.2 – Channel Metering Views Chan nel Name (Dante Tx Name) Certain features of the D32Mi such as channel mutes, output level, and front panel lockout are controlled using unIFY Control Panel application.
Synapse D32Mi Attero Tech by QSC User Manual 3.1.5 – Version View 3.3 – Factory Reset Should it be necessary, the D32Mi has a factory reset option. Activating it affects both Dante™ and non-Dante™ settings of the device. All Dante™ settings are reset including device name and...
The device shall be compliant with FCC 47CFR parts 15B and 18 (Class A), EN 55011, ICES-003, RoHS and CE (EN55022 Class A and EN55024 Class A). The device shall be the Attero Tech Synapse D32Mi. QSC, LLC 2020...
Need help?
Do you have a question about the Attero Tech Synapse D32Mi and is the answer not in the manual?
Questions and answers