2.0 INTRODUCTION
2.1 IN-USE NOTICES
•
Disconnect the power cord before connecting or disconnecting any components.
•
If the MRX/AVM was transported or stored in the cold, let it reach room temperature before use.
•
Due to continuing advances, operational characteristics may change. If this manual contains discrepancies, please
check www.AnthemAV.com for the latest manual or software.
2.2 DEFAULT INPUTS
Source
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
eARC
Streaming
Bluetooth
The unit comes programmed from the factory with six inputs, but you may change this to create up to 30 inputs. MRX/
AVM uses virtual inputs that give you complete control of the name of each input you create, along with which video
(HDMI) input to use, which audio input (HDMI, digital, analog or streaming) to use, which speaker profile to use, and
much more. You can even create multiple inputs for the same source device. For example, a Blu-ray input configured
for 7.1.4-channels and another Blu-ray input configured for 2-channels (and no subwoofer). For information on setting
up inputs, refer to the Setup section of this manual.
Audio Input
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI eARC
Streaming
Bluetooth
Video Input
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
None
None
None