a-them AVM 90 Operating Manual page 44

Units
Choose between imperial and metric versions of measurement.
Front Panel Brightness
Set the preferred default brightness of the front panel. Note, when set to "Off," even the lights behind the power
buttons are turned off. By default the MRX/AVM is set with 10% brightness, in most rooms this is a good setting but if
your room is quite dark, the backlight may look too bright.
Front Panel Wake-Up
After pressing a button, the display can go to a brighter level for five seconds. Note that the minimum setting will
change depending on your selected setting for FRONT PANEL BRIGHTNESS, this is to stop from the possibility of
making the screen dimmer when pressing buttons.
On-Screen Info Display
This setting affects the 2 line display that appears on-screen when changing settings such as input or volume. By
default it is set to 16:9 which is the aspect ratio of the majority of televisions. 2.4:1 can be used with a wide projection
screen to keep the 2 line display properly positioned in relation to the screen.
On-Screen Zone Display
This setting affects the 2 line display that appears on-screen when changing settings such as input or volume. The
information displayed here will always reflect what is being changed in the Main Zone. By default you can see
changes happening on both the Main Zone and Zone 2 displays but if you can limit the information to only be
displayed on the Main Zone.
Front Panel Displayed Info
Choose between "Volume Only" and "All" for information to be displayed on the front panel of the unit. "All" will
include information such as incoming audio and video signals.
Master Volume Scale
By default this is set to "dB" which is common for most modern receivers. dB references the volume trim of the
incoming signal where "0.0 dB" is the unaltered signal coming in from a source, while this is the standard it can be
confusing for new users. "%" offers a volume scale of 0-100 which is standard for computers, televisions and most
sources.
Mute Level
By pressing Mute, sound can turn off completely or decrease in volume by the amount that you select. This setting
allows mute to decrease the volume while still keeping some in the background. Select from Silent or -5 to -30 dB in 5
dB steps.
Maximum Volume
These settings allow you to limit the volume setting to avoid damaging equipment or hearing.
Power-On Volume
This setting controls a volume level to use when first powering the MRX/AVM. To power- on at the last used volume,
select "Last Used" by changing the value to less than -90.
Power-On Input
This setting controls which input to use when first powering on the MRX/AVM. Select from one of the available inputs
or "Last Used."
Headphone Mutes Main Outputs
Changing this to "No" allows the speakers to continue playing with headphones plugged into the front panel.
Default Streaming Zone
Choose between the Main Zone and Zone 2. This option will determine where your streaming is automatically sent
once you start streaming to the MRX/AVM.