Save / Load / Update - a-them AVM 90 Operating Manual

Trigger Delay
Choose whether your trigger is delayed or not. This can be useful if there is a "pop" when something turns on too
soon after the MRX/AVM.

5.8 SAVE / LOAD / UPDATE

Store / Load / Update
Check for Update
Store User Settings
Store Installer Settings
Load User Settings
Load
Reset on-the-fly Settings
Load Factory Defaults
Check For Update
This option requires an internet connection. When you select this option, it will scan for a software update and prompt
to update if one is found. If you have "Automatic Updates" enabled in the preferences menu, you will not have to
check for updates manually.
To update unit by USB, you must contact technical support.
Store/Load User Settings
Selecting Save User Settings and confirming saves all menu settings. If you change settings later and want to recall
the saved settings, select Load User Settings, and press SELECT.
Store/Load Installer Settings
This offers the same functionality as the SAVE/LOAD user settings but offers you a second option for an installer to
save their settings when they leave. This can be useful if user settings are modified to a point where there are issues
so they can revert back to the settings where the installer last left them.
Reset On-The-Fly Settings
Selecting and confirming this option resets all non-menu settings such as level and bass/treble.
Load Factory Defaults
Selecting and confirming this option resets all menu settings to the factory defaults. This options does not reset
network settings.
Reset Network Settings
Selecting and confirming this option resets all network settings.
System Reset
This process is not available using the on-screen menu. To manually reset the MRX/AVM to factory condition, connect
power, and press the front panel Menu and Main Power buttons at the same time. The unit should turn on. This
process is useful if the MRX/AVM has become inoperable. However, the method described above wipes all user
settings. Before doing this, try manually rebooting the MRX/AVM first:
• Disconnect the power cord.
• Press the front panel power button five times to drain any residual power.
• Reconnect the power cord.
• Power on the MRX/AVM.