Table of Contents
Advertisement
Settings
The Settings screen configures universal settings for the node.
Node Thumbwheel Address (Vx76 Mode)
+
Press address to set the node thumbwheel address using
the numeric keypad.
+
Note: Press the number field to clear the value.
Universe Display
+
Sets display format for DMX universes as either Numeric
or Alphabetical. (This is a device-wide setting.)
Backlight
+
Sets the display's backlight behavior.
-
On: The display backlight is always on.
-
Auto: The display backlight turns off after a period of
inactivity. The first tap on the screen will wake up the
display but not activate a button.
Status
The Status screen displays various information about the node
for troubleshooting purposes.
+
Version: Displays the currently loaded Super Node
software version number and build date.
+
Network: Displays whether a valid network link is
established (e.g. active, inactive). Press this button to
open the Network screen. (Refer to
page 19.)
+
Temperature: For future use.
+
Load: For future use.
+
Memory: For future use.
SUPER NODE™ USER MANUAL
18
"Network"
on
Keypad Numeric:
Advertisement
Table of Contents
