Table of Contents
Advertisement
Vx76 Mode
When the Super Node is connected to a Vx76 series console,
the menu system will provide "Vx76" screens which can be
used to set up and monitor the Vx76 system.
Vx76 Node (Address)
+
Indicates the node address as a number.
+
Press this button to open the Settings screen. (Refer to
"Settings"
on page 18.)
Status
+
Displays the current status of the node using the following
indicators:
-
Configure: Node is waiting for patch data from the
console.
-
Download: Node is downloading show data from the
console.
-
Online: Node is operating normally.
-
Updating: A software update is in progress.
+
Press this button to open the Status screen. (Refer to
"Status"
on page 18.)
IN (In Port)
+
For future use.
Out Ports (1-16)
+
Displays one button per physical port across the top of the
bottom half of the screen. (8 Total.)
+
Displays one button per network-only port across the
bottom of the bottom half of the screen. (8 Total.)
+
Buttons show the assigned universe (in the chosen display
format).
+
If no universe is assigned, the button shows only the port
number.
+
Press any of these buttons to open the Monitor screen.
(Refer to
"Monitor"
on page 19.)
SUPER NODE™ USER MANUAL
16
Example status indications:
Advertisement
Table of Contents
