Table of Contents
Advertisement
GENERAL OPERATION
Operating Modes Overview
The Super Node operates in one of two modes: Vx76 or Series 400. The mode will depend on what protocol it is
receiving on its Console In Port.
+
Vx76 Mode - In this mode, the unit will accept Vx76 protocol and generate
outputs.
Vx76
Protocol
+
Series 400 Mode - In this mode, the unit will accept Art-Net protocol and convert it to DMX512. (When used with
the Series 400 rack, the Node will follow the selected A, B, or C system.)
Art-Net
Protocol
Reset
In the event a software reset is necessary, press the reset button located between ports 4 and 5.
(The button can be pressed using a small instrument.)
SUPER NODE™ USER MANUAL
14
SUPER NODE
[ Vx76 Mode ]
SUPER NODE
[ S400 Mode ]
Reset Button
Figure 6: Reset Button
both
Art-Net/sACN and DMX512
Art-Net/sACN and DMX512
DMX512
Advertisement
Table of Contents
