Table of Contents
Advertisement
INSTALLATION
System Options
Vx76
In the Vx76 configuration, one or two Vx76 control consoles may be connected to one or more Super Nodes.
Guidelines:
+
When connecting two Vx76 consoles and multiple Super Nodes, a 100Mb Ethernet switch or hub
Standard CAT5e Ethernet cables should be used in this configuration. Refer to the illustration below.
+
The Vx76 Mode of operation is used in this configuration. Refer to
V676 CONSOLE "A"
CAT5e Ethernet Cables
* PRG Belden Ethernet cable or equivalent.
CAT5e Ethernet Cables
Vx76 Protocol CAT5e *
100 Meter
Maximum
Vx76 Protocol CAT5e *
PRG 10-PORT (FIBER) ETHERNET SWITCH
or
PRG 7-PORT (COPPER) ETHERNET SWITCH
Figure 3: Vx76 Configuration Example
"Vx76 Mode"
on page 16.
V676 CONSOLE "B"
Art-Net DMX
(to S400 Rack)
SUPER NODE
8x XLR DMX512 Data Cable
Art-Net DMX
(to S400 Rack)
SUPER NODE
8x XLR DMX512 Data Cable
SUPER NODE™ USER MANUAL
must
be used.
11
Advertisement
Table of Contents
