Table of Contents
Advertisement
When you need to switch your device between portrait and landscape orientation when it is
•
placed on a surface, just keep your face in front of the screen and rotate your device.
When you are using your device while lying down, the screen will not change its display
•
orientation when you change the way you are lying.
The Swing Gesture Sensor is located at the top of the screen. To ensure that the sensor
can effectively identify your face orientation, keep your face in front of the screen during
use.
Why Can't the Screen Rotate Intelligently?
The possible causes are as follows:
Your device comes equipped with the Swing Gesture Sensor to detect the face direction.
•
Therefore, you need to ensure that the sensor can detect faces.
Do not cover the sensor, which is located in the upper left corner of the screen.
–
Look straight at the screen and keep a distance of 40–60 cm away from the sensor.
–
The sensor works better in a well-lit environment.
–
Landscape display is not supported in some apps (such as navigation or game apps) and
•
the home screen.
Introduction to GPU Turbo
GPU Turbo represents a radical redesign of the graphics processing framework of the device
at its most basic level, integrating hardware and software to achieve accelerated graphics
processing. It improves the device's graphics processing efficiency, image quality, and
performance, whilst simultaneously reducing system power consumption.
The end result is a great improvement in user experience when playing graphically intense
games.
Sounds & Vibration
Set Do Not Disturb Mode
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner notifications will not be displayed.
Enable or Disable Do Not Disturb
You can enable or disable Do Not Disturb using either of the following methods:
Swipe down from the status bar to open the notification panel, swipe down on it again to
•
show all shortcuts, then turn on or turn off Do Not Disturb. You can touch and hold Do
Not Disturb to access the settings screen.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable or disable Do Not
•
Disturb.
Settings
146
Advertisement
Table of Contents
