Sounds & Vibration - Huawei Y8p User Manual

For apps that don't, go to
•
Full-Screen Display, and toggle on their switches. Enabling Full-Screen Display may cause
some apps to display incorrectly, for instance, by being improperly stretched.
Display Carrier Name and Network Speed in the Status Bar
You can check the carrier name and network speed with a single glance at the status bar.
Go to Settings > Display & brightness > More display settings, and enable or disable
Display carrier name and Display network speed according to your preferences.
Switch Between Portrait and Landscape Orientation
The built-in gravity sensor of your phone allows you to automatically switch between
horizontal and landscape orientations when you rotate the screen.
Swipe down from the status bar to open the notification panel, then swipe down on it again
to show all shortcuts. Touch
Sounds & Vibration
Vibrate Mode and More Sound Settings
1
Go to Settings > Sounds & vibration, and enable or disable Vibrate in silent mode
according to your preferences.
2
Touch More sound settings. Then you can set the sound for the following items:
Keypad tones
•
Screen lock
•
Screenshot
•
Screen touch
•
Vibrate on touch
•
Startup sound
•
This feature may vary by device.
Do Not Disturb
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner notifications will not be displayed.
Enable or Disable Do Not Disturb
You can enable or disable Do not disturb using either of the following methods:
Settings > Display & brightness > More display settings >
to enable or disable this feature.
Settings
81