Table of Contents
Advertisement
If you select
environment, a flash icon will appear in the viewfinder and the flash will be
automatically turned on when you take a photo.
These features may not be available in some camera modes.
3
Touch the shutter button to take a photo.
Use the Floating Shutter to Take Photos
You can enable the floating shutter to display when you are using the camera. Drag it
anywhere you like to take photos quickly.
1
Go to Camera >
2
The floating shutter will then show up in the viewfinder. You can drag it anywhere you
like.
3
Touch the floating shutter to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1
Open Camera, select Photo mode, and make sure the rear camera is in use.
2
Touch and hold
When shooting, you'll see a counter, which indicates how many photos you've taken so
far.
3
Lift your finger to stop shooting.
Select the Burst Photos You Want to Keep
1
Open Gallery. Touch a burst photo (which is tagged with
2
Swipe through the burst photos, select the ones you want to keep, then touch
follow the onscreen instructions.
To delete the whole burst photo, touch and hold to select the photo, then touch
Take Timed Photos
The camera timer allows you to set a countdown so you can get into position after you have
touched the shutter button.
1
Go to Camera >
2
Return to the viewfinder and touch the shutter button. Your device will take a photo when
the countdown ends.
(Auto) and the camera detects that you are in a dimly lit
, then enable Floating shutter.
or press and hold one of the Volume buttons to take a burst photo.
> Timer and select a countdown.
Camera and Gallery
), then touch
.
.
and
57
Advertisement
Table of Contents
