Sata to ide, sata to sata,
ssd/hdd mounting frame (10 pages)
Summary of Contents for Digitus DA-70842
Page 1
Manual DA-70842 Rev. 2 Description DIGITUS USB 3.0 to DVI Adapter, resolution up to 1920x1080 @60Hz, extend and mirror mode support. The DIGITUS USB 3.0 to DVI Adapter extends your workspace with an additional monitor, TV or projector via the USB interface. You can use two graphic adapters simultaneously on the PC and add or remove a monitor without rebooting the system.
Page 2
4GB DDR3 SDRAM Operating System: Windows 7 and above Installation 1. Connect DA-70842 USB port to computer 2. New USB flash driver will be found 3. Install the driver (.exe file) and reboot the computer. 4. Connect DVI connector to monitor PS: If there is new OS version released, please go to website http://www.business.assmann.com/and download new driver.
Page 4
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany...
Need help?
Do you have a question about the DA-70842 and is the answer not in the manual?
Questions and answers