Sata to ide, sata to sata,
ssd/hdd mounting frame (10 pages)
Summary of Contents for Digitus DA-70841
Page 1
Manual DA-70841 Rev. 2 Description DIGITUS USB 3.0 to HDMI Adapter, resolution up to 1920x1080 @60Hz, extend and mirror mode support The DIGITUS USB 3.0 to HDMI Adapter extends your workspace with an additional monitor, TV or projector via the USB interface. You can use two graphic adapter simultaneously on the PC and add or remove a monitor without rebooting the system.
Page 2
Intel i3 2.5GHz or Higher 4GB DDR3 SDRAM Operating System: Windows 7 and above Installation Connect DA-70841 USB port to computer New USB flash driver will be found Install the driver (.exe file) and reboot the computer. Connect HDMI connector to monitor PS: If there is new OS version released, please go to website http://www.business.assmann.com/and download new driver.
Page 3
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lü...
Need help?
Do you have a question about the DA-70841 and is the answer not in the manual?
Questions and answers