Usb type-c 4k mini displayport graphics adapter (36 pages)
Summary of Contents for Digitus DA-70840
Page 1
Manual DA-70840 Description DIGITUS USB 3.0 to VGA Adapter, resolution up to 1920x1080 @60Hz, extend and mirror mode support The DIGITUS USB 3.0 to VGA Adapter extends your workspace with an additional monitor, TV or projector via the USB interface. You can use two graphic adapters simultaneously on the PC and add or remove a monitor without rebooting the system.
Page 2
Intel i3 2.5GHz or Higher 4GB DDR3 SDRAM Operating System: Windows 7 and above Installation Connect DA-70840 USB port to computer New USB flash driver will be found Install the driver (.exe file) and reboot the computer. Connect HDMI connector to monitor PS: If there is new OS version released, please go to website http://www.business.assmann.com/and download new driver.
Page 3
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below mentioned manufacturer address. Warning: This device is a class B product.
Need help?
Do you have a question about the DA-70840 and is the answer not in the manual?
Questions and answers