Specifications - Monacor CARPOWER HPB-418/SW Manual

6 Level and Sound Matching
!
Prior to switching on and the level
and sound matching the complete
wiring of the car HiFi power amplifier
should be checked once again. Only
then connect the negative terminal
of the car battery again.
1) With the right control GAIN (5) match the
output level of the car radio for the front
speakers to the power amplifier.
2) With the left control GAIN (2) match the
volume of the rear speakers to that of the
front speakers.
3) With both controls BASS and TREBLE (4)
match the sound of the rear speakers to
that of the rear speakers.

7 Specifications

Frequency range: . . . . . 30 – 30 000 Hz
Output power max.: . . . . 4 x 36 W
Output power rms: . . . . 4 x 18 W
Output impedance: . . . . 4 x 4 Ω
Inputs, 4 x line: . . . . . . . adjustable
Channel separation: . . . > 50 dB
S/N ratio: . . . . . . . . . . . > 80 dB
THD: . . . . . . . . . . . . . . . < 0.1 %
Power supply: . . . . . . . . 11 – 16 V ,
Dimensions
(W x H x D): . . . . . . . . . . 171 x 43 x 160 mm
Weight: . . . . . . . . . . . . . 0.75 kg
According to the manufacturer.
Subject to technical change.
0.1 – 1 V/10 kΩ
7 A max.,
Chassis minus
GB
9