Table of Contents
Advertisement
Installation
1
Turn off the power. Make sure the wires are not under electric
current.
3
Make sure the liniLED® Diffuse LED strip and the U-Profile are
aligned.
5
Long lengths should be installed by two installers to prevent the
LED strip from twisting or bending. Keep in mind the minimum
bending radius of 150 mm.
2
Unspool the LED strip on a horizontal surface.
4
Gently push the liniLED® Diffuse LED strip into the U-Profile.
6
Minimum bending radius of the cable is 25 mm.
25 mm
Manual | liniLED® Diffuse
8
Advertisement
Table of Contents
