Advertisement
SZ P - 10 2 /SZP - 10 3 / SZP - 104
TYPE
Pole Installation
① Install the Pole to the NPT Bracket.
Tighten tightly !
Product Attachment
□3-screw Mounting Type
① Take out the wiring.
② If using a Rubber Gasket (SZW-102 / SZW-103),
waterproofing is required.
(Refer to "Product Attachment (page 17)" for
mounting instructions for the Rubber Gasket.)
③ Insert the bolts of the beacon into the mounting holes of t
ihe NPT Bracket.
④ Use the nuts (accessory) to secure
the mounting surface of the NPT Bracket.
Recommended
Nut
Model
SF08/SL08/SKS
M4
SF10/SL10/SKH
M5
SL15/SKP
M8
□2 - point Hole Leg Mounting Type
3 - point Hole Leg Mounting Type
① Using the mounting holes on the NPT Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws are not included with this product.
Binding head screws or pan head screws are recommended.)
Recommended
Screw
Model
Torque
SF08/SL08
M4
0.7 N•m
SF10/SL10
M5
1.4 N•m
SL15
M8
6.0 N•m
② Take out the wiring.
③ Check that the O-ring is not twisted.
④ Align the indicators of the Base and the body of the beacon,
then twist clockwise to lock in place.
( Check the INSTRUCTION MANUAL for the lock state )
Torque
0.7 N•m
1.4 N•m
6.0 N•m
①
③
②
①
④
3-screw Mounting Type
④
①
③
②
2 - point Hole Leg Mounting Type
19
External Thread
Model
External Thread
SZK-102
1/2 NPT
SZK-103
1/2 NPT
SZK-104
3/4 NPT
Rubber Gasket
Mounting bracket
O Ring
Waterproof Sheet
Advertisement
