Advertisement
SZ W - 10 1
TYPE
● After installing the product, fix the Ceiling Mount Bracket to the ceiling.
Product Attachment
□3-screw Mounting Type
① Insert the product bolt into the mounting hole of the Ceiling Mount Bracket.
② Use the nuts and washer (accessory) to secure the product.
Model
Nut
SF10/SL10/SKH
M5
③ Attach the Ceiling Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
□2-point Hole Type Mounting
① Using the mounting holes on the Ceiling Mount Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws and nuts are not included with this product. )
Recommend
Model
Screw
M5×20mm or
SF10/SL10/SKH
M5×14mm
② Check that the O-ring is not twisted.
③ Align the indicators of the Mounting Bracket and the body of the beacon,
then twist clockwise to lock in place.
(Read the applicable instruction manual for the locked state.)
④ Attach the Ceiling Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
■Mounting Dimensional Drawing［Unit：mm］
90°
Recommend
Torque
1.4 N･m
Recommend
Torque
1.4 N･m
Mounting Hole
4 - 6
Wiring Hole
15
135
Caution
②
①
①
②
③
Recommend
Screw / Nut
Torque
M5
1.4 N･m
16
3-screw Mounting Type
Waterproof Sheet
Mounting Bracket
O-ring
2-point Hole Type Mounting
Advertisement
