Advertisement
SZ K -1 0 2
TYPE
● When using the Wall Mount Bracket (SZK-102) with a Rubber Gasket (SZW-102/SZW-103), the protection rating is IP23.
● If the rated voltage of the product to be installed exceeds 100V AC, use the Wall Mount Bracket Cover (SZK-104).
Product Attachment
□3-screw Mounting Type
① Attach the Wall Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
② Insert the product bolt into the mounting hole of the Wall Mount Bracket.
③ Use the nuts and washer (accessory) to secure the product.
Model
Nut
SF08/SL08/SKS
M4
SF10/SL10/SKH
M5
□2-point Hole Type Mounting
① Attach the Wall Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
② Using the mounting holes on the Wall Mount Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws and nuts are not included with this product. )
Recommend
Model
Screw
SF08/SL08
M4×20mm
SF10/SL10
M5×20mm
③ Check that the O-ring is not twisted.
④ Align the indicators of the Mounting Bracket and the body of the beacon,
then twist clockwise to lock in place.
(Read the applicable instruction manual for the locked state.)
■Mounting Dimensional Drawing［Unit：mm］
Recommend
Torque
0.7 N･m
1.4 N･m
Recommend
Torque
0.7 N･m
1.4 N･m
Mounting Hole
4 - 6
70
Wiring Hole
15
Caution
②
③
④
③
②
Recommend
Screw / Nut
Torque
M5
1.4 N･m
13
3-screw Mounting Type
Mounting Bracket
O-ring
Waterproof Sheet
2-point Hole Type Mounting
Advertisement
