Warranty And Liability; Environmental Protection, Dis- Posal - Fein BOP6 Instruction Manual

Hide thumbs Also See for BOP6:
Table of Contents

Advertisement

Available languages

Available languages

OBJ_BUCH-0000000005-001.book Page 15 Friday, February 5, 2010 8:57 AM
Repair and customer service.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Service.
Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and compo-
nents can cause serious injuries. Have the
required service carried out only through a
FEIN customer service agent.
Cleaning.
Prior to any cleaning or main-
WARNING
tenance, disconnect the power
tool from the power supply in order to avoid
accidents.
When using in environments
WARNING
with conductive dust in the air,
such as when working metals, this dust can
settle in the interior of the power tool. This
can impair the total insulation of the power
tool. Therefore, regularly blow out the interior
of the power tool from outside via the ventila-
tion openings with dry, oil-free compressed
air; always wear eye protection when doing
this. For additional protection, connect a
residual current device (RCD) on the line side.

Warranty and liability.

The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed. In addition,
FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty decla-
ration.
The delivery scope of your power tool may
include only a part of the accessories
described or shown in this instruction man-
ual.
Environmental protection, dis-
posal.
Packaging, worn out power tools and acces-
sories should be sorted for environment-
friendly recycling.
Do not attempt to clean
CAUTION
clogged or dirty ventilation
openings of the power tool with pointed
metal objects; use non-metal tools or objects
for this.
Do not use cleaning agents
CAUTION
and solvents that can cause
damage to plastic parts. These include:
Gasoline, carbon-tetrachloride, chloric sol-
vents, ammonia and domestic cleaning agents
that contain ammonia.
If the supply cord of this
CAUTION
power tool is damaged it must
be replaced by a specially prepared cord avail-
able through the FEIN customer service cen-
tre.
en
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bop10Bop10-2

Table of Contents