Sharp AL-1217D Operation Manual page 33

8
Begin installation of the Sharpdesk (This step will start if it was
selected in step 4).
1
2
3
4
5
9
Click the "Close" button when the
message to inform you of the
completion of the installation appears.
When the "Now connect the MFP
interface cable to the PC." dialog box
or "After Windows system restarts..."
dialog box appears, click the "OK"
button.
10
Make sure that the power of the MFP is turned on, and then
connect the parallel interface cable. (p.45)
You have completed the installation of all the software.
Downloaded from:
After confirming the message in the "Welcome to Sharpdesk
installation" window, click the "Next" button.
Read the message in the "Information" window, and then click the
"Next" button.
When the "Choose Destination Location" window appears, click
the "Next" button.
When the "Select Program Folder" window appears, click the
"Next" button.
The setup program will start to copy the files.
If the dialog box asking "This program is
about to install Sharpdesk imaging, which
does not support LZW compression."
appears, answer the question to continue
the Sharpdesk installation.
Click the "Finish" button when the
message to inform you of the completion of the installation
appears.
After the installation, a message to
restart your computer may be
displayed. In this case, click the "Yes"
button to restart your computer.
http://www.usersmanualguide.com/
4
31