Performance Data - Trane RAUP 250 Installation Operation & Maintenance

Foreword
These installation operation and maintenance instructions are
given as a guide to good practice in the installation, putting, into
service, operation and periodic maintenance by the Trane Product
user. They do not contain the full service procedures necessary
Warranty
Warranty is based on the general terms and conditions of The
Trane Company. The warranty is void if the equipment is repaired
or modified without the written approval of Trane, if the operating
Receiving/Handling
On arrival, inspect the unit before signing the delivery note. Specify
any damage on the delivery note, and send a registered letter of
protest to the last carrier of the goods within 72 hours of delivery.
Notify the local Trane Sales Office at the same time. The unit
should be totally inspected within 15 days of delivery.

Performance Data

for the continued successful operation of this equipment. The
services of a qualified service technician should be employed
through the medium of a maintenance contract with a reputable
service company.
limits are exceeded or if the control system or the electrical wiring
is modified. Damage due to misuse, lack of maintenance or failure
to comply with the manufacturer's instructions or recommendations
is not covered by the warranty obligation.
If any concealed damage is discovered, stop unpacking the
shipment . Take photos of the damaged material if possible. Notify
the Carrier immediately by phone and registered mail. Notify the
local Trane Sales office. Concealed damage must be reported
within 15 days of delivery.
(i)