Advertisement
Quick Links
Advertisement
Related Manuals for Da-Lite Pivoting Da-Lift 26P
Summary of Contents for Da-Lite Pivoting Da-Lift 26P
- Page 1 INSTRUCTION BOOK FOR Pivoting Da-Lift 26P and 33P...
- Page 2 Da-Lite Screen. 4. To reduce the risk of electric shock, do not disassemble this This unit must be installed in accordance with the requirements appliance.
- Page 3 Procedure The following procedure is shown with suspended ceiling construction but the Pivoting Da-Lift will work with drywall ceiling. Remove contents from carton and examine for damaged or missing parts. If installing the Pivoting Da-Lift with a plenum cover, fasten Plenum Cover Bottom to Da-Lift first.
- Page 4 Procedure 2. Remove Trim piece from Da-Lift. See Figure 4. Save the fasteners. 5. Secure the projector and mount to the Da-Lift. Use the features shown to adjust the projector’s position. See Figure 3 and 7. 3. Remove Universal Projector Mount from Da-Lift. See Figure 5. Projector lens should not protrude past all-thread centerline.
- Page 5 Procedure (Continued) 7. The Da-Lift comes with factory installed preset limit switches. 8. Attach Da-Lift to the structural ceiling. See Figure 10. See Figure 9. If obstructions above the ceiling will prohibit easy 9. Lower Da-Lift by connecting the power supply to 120 volt or access to the switches, the switches may be moved to the 220 volt AC power.
- Page 6 Procedure (Continued) 10. Power the projector and adjust projector location. 11. Remove Ceiling Tile Holder Cap from Da-Lift. Install Ceiling Tile cutout from step 6 into Ceiling Tile Holder and assemble Ceiling Tile Holder Cap. See Figure 12. 12. Install Trim Piece onto Da-Lift. See Figure 13. You may need to Ceiling Tile adjust the position of the Ceiling Tile Holder to clear the Trim.
- Page 7 Procedure (Continued) 17. Optional Infrared (IR) or Radio Frequency (RF) remote controls 15. Wire the wall switch supplied with the Da- Lift. See Figure 17. are available. To install either remote, remove the Covers from 16. A control panel may be connected to the Da-Lift by using the the Control Box.
- Page 8 Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective part of the merchandise. Returns for service should be made to your Da-Lite dealer. If it is necessary for the dealer to return the screen or part to Da-Lite, transportation expenses to and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in shipment.