Resetting All Remote Control Codes - Yamaha RX-V861 Owner's Manual

Resetting all remote control codes

Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
Press U CODE SET using a ballpoint pen or
1
a similar object.
The V TRANSMIT indicator on the remote control
flashes twice.
CODE SET TRANSMIT
POWER POWER STANDBY POWER
TV AV
2
Press the numeric buttons ( B ) to enter the
code number "9981".
The V TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
1 2 3
STEREO ENHANCER STRAIGHT PURE DIRECT
5 6 7
SUR. DECODE NIGHT
9 0
y
If you do not press any buttons within 30 seconds after step
2, the clearing process is canceled. In this case, repeat the
clearing procedure.
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
Remote control features
89
En