Audio selector panel, marker beacon receiver, stereo intercom system with bluetooth connectivity, for dual audio panel installations (9 pages)
Summary of Contents for PS Engineering MB10 Series
Page 1
Flying Never Sounded So Good!® Sound Quality. Sound Engineering. MB10 Marker Beacon Receiver/ Indicator Part No. 050-023- (XXXX) Pilots Guide PS E NGINEERING NCORPORATED 9800 Martel Road Lenoir City, TN 37772 Phone (865) 988-9800 FAX (865) 988-6619 www.ps-engineering.com FAA-Approved, TSO C35d NOTICE: Warranty is not valid unless this Document Number 202-023-0100 product is installed by an Authorized PS Engineer-...
Page 2
75 MHz Crystal Controlled This manual contains opera- Sensitivity: Capable of: (preset at factory for field tional instructions for the following Low: application) PS Engineering units: 1000 µVolts (Hard) High: (360 to 570 µV Model Part Num- Description soft) Number 200 µVolts (Hard)
Page 3
'dash' bursts at 95 combinations by an appropriately rated FAA- cer- per minute. tified avionics shop and authorized PS Engineering dealer. If the unit is The White lamp, labeled "I”, is being installed by a non-certified the Inner marker and has a 3000- individual in an experimental air- Hertz 'dot' tone.
Page 4
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed writ- ten permission of PS Engineering, Inc. is strictly prohibited. For further information contact the Publica- tions Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800 MB10 Pilots Guide...
Need help?
Do you have a question about the MB10 Series and is the answer not in the manual?
Questions and answers