Speaker Balance Adjustment - Yamaha RX-V901 Owner's Manual

Yamaha natural sound stereo receiver owner's manual

Table of Contents

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test

tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.

This is important for the best performance of the digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.

Otherwise, the result may not be satisfactory.

For U.S.A., Canada and Australia models only

Use the remote control transmitter with the YPC-USER-LEARN switch on it set to the YPC position.

Set to the "

Select the front speakers to be used.

* If you use two front speaker systems, press both the A

and B switches.

BASS

Set to the "0" position.