Speaker Balance Adjustment - Yamaha RX-V10 Owner's Manual

SPEAKER BALANCE ADJUSTMENT

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from
each speaker. This is important for the best performance of the digital sound field processor.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
4
2
1
0
Set to the "0" position.
2
Select the front speakers to be used.
SPEAKERS
B
ON
A
* If you use two front speaker systems, press both the A
and B switches.
3
BASS
0
– +
Set to the "0" position.
1
3
VOLUME
I0
OFF
TREBLE
BALANCE
0
– +
L R
– +
LEVEL
PROGRAM
DIR A DIR B REC/PAUSE
– +
PRESET
DISC
POWER
4
Turn the power on.
POWER
5
Select the PRO LOGIC or
ENHANCED program, so that the corresponding name
lights up on the display.
PROLOGIC
DELAY/REAR
/CENTER TEST EFFECT
ON/OFF
5
PROLOGIC ENHANCED
DVD/LD
VCR 2CH/5CH
PLAY
TAPE
A/B
A/B/C/D/E TUNER
PLAY
CD
PHONO
VOLUME
PRO LOGIC
ENHANCED
CONTINUED
17