Delta 7886 Assembly Instructions Manual page 7

Section 1: Crib Assembly
Step 2
Parts and tools required to complete step.
From Step 1
Attach (1) Back Rail Bottom (Part B) to the assemblies from step 1 using (4) M6x55mm Bolts (Part N) .
Insert the tenon of the Back Rail Top (Part A) into the slot on top of the Back Rail Bottom (Part B), then insert the
M6x55mm Bolts (Part N), through the legs into the insert nuts onto the Back Rail Top (Part A) as shown.
Tighten with the M4 Allen Wrench.
NOTE : THE SLOT IN PART B MUST FACE UP.
TENON
SLOT
A. Back Rail Top x 1
B. Back Rail Bottom x 1
N
WARNING LABEL
A
N
M4 Allen Wrench
Supplied
N. M6 x 55 mm Bolt x 6
B
N
N
7