Section 1: Crib Assembly - Delta 7886 Assembly Instructions Manual

Section 1: Crib Assembly

Step 1
Parts and tools required to complete step.
D. Right Rear
Leg x 1
G. Left Front
Leg x 1
C. Left Rear
Leg x 1
Attach (1) Left Crib End (Part E) to (1) Left Rear Leg (Part C) and (1) Left Front Leg (Part G) using (1)
Φ4x30mm Metal Pins (Part T), (2) M6x45mm Bolts (Part P) and (3) M6x40mm Bolts (Part R). Tighten
with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.
Repeat on the Right Crib End (Part F).
NOTE: AFTER ASSEMBLY, THE "STEPPED HOLES" IN BOTH POSTS ARE ON THE SAME SIDE.
P
C
T
P
WARNING LABEL
PRODUCT LABEL
ON INSIDE FACE
H. Right Front
Leg x 1
PRODUCT LABEL
E. Left Crib
End x 1
T. Φ4x30 mm Metal Pin x 2
E
R
R
Left Crib End
WARNING LABEL
F. Right Crib
End x 1
G
M4 Allen Wrench Supplied
P. M6 x 45 mm Bolt x 4
R. M6 x 40 mm Bolt x 6
6