Step 1: Set Up Your Speakers; Setting Up Speakers - Yamaha RX-V463 Owner's Manual

Step 1: Set up your speakers

Place your speakers in the room and connect them to this
unit.
COAXIAL
OPTICAL
DVD DTV/CBL CD
DVD IN1 DTV/CBL IN2 OUT
HDMI DIGITAL INPUT XM SIRIUS
COMPONENT VIDEO
DVD DTV/CBL
P R P B Y P R P B Y
A B
DVR
C
MONITOR OUT
VIDEO
VIDEO
IN OUT MONITOR
DVD DTV/CBL DVR OUT
L L
CENTER
R R
WOOFER WOOFER
IN MD/ OUT IN OUT SUB
FRONT
SURROUND WOOFER
(PLAY) CD-R (REC) DVD DTV/CBL DVR CD
AUDIO MULTI CH INPUT OUTPUT OUTPUT
1
Place your speakers and subwoofer in the
room.
2
Connect speaker cables to each speaker.
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the "+" (red) terminals of
your speaker. Connect the plain cable to the "–"
(black) terminals.
3
Connect each speaker cable to the
corresponding speaker terminal of this unit.
1 2
1 Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
2 Twist the exposed wires of the speaker cables
together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal
part of this unit.
SPEAKERS SPEAKERS
DOCK
ANTENNA
AM
R R SURROUND SURROUND L L
GND
FM
75
UNBAL.
SUB SUB
R L R L
CENTER CENTER R FRONT A FRONT A L R FRONT B FRONT B L
3 4
Be sure to connect the left channel (L), right channel
(R), "+" (red) and "–" (black) properly.
Front and center speakers
Loosen Insert
To the center
speaker
To the front
right speaker
Surround speakers
4
Connect the subwoofer cable to the input
jack of the subwoofer and the SUBWOOFER
OUTPUT jack of this unit.
Subwoofer
Input jack
Subwoofer cable
Quick start guide
Tighten
To the front
left speaker
To the surround To the surround
right speaker left speaker
AV receiver
SUBWOOFER
OUTPUT jack
5
En