Automatic Preset Tuning; Manual Preset Tuning - Yamaha RX-V463 Owner's Manual

FM/AM tuning

Automatic preset tuning

You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (A1 to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
1
Press OINPUT l / h repeatedly so that
"TUNER" is displayed in the front panel
display.
2
Press CBAND to select "FM" as the
reception band.
3
Press and hold FMEMORY for more than 3
seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.
A1:FM 88.9 MHz
Flashes
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y
You can select the preset station group and the preset station
number where the first received station will be stored by pressing
DA/B/C/D/E and then EPRESET/TUNING/CH l / h.
Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it as described in "Manual preset tuning" on this page.
44
En
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
1
2
3
Flashes
MEMORY
AUTO
4
Notes
• Any stored station data existing under a preset station number is
• The reception mode (stereo or monaural) is stored along with

Manual preset tuning

Tune into a station automatically or manually.
See page 43 for tuning instructions.
Press FMEMORY .
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
Press DA/B/C/D/E and
EPRESET/TUNING/CH l / h repeatedly
to select a preset station group (A1 to E8)
while the MEMORY indicator is flashing.
Check that the colon (:) appears in the front panel
display.
A3:FM 88.9 MHz
Preset station Colon (:)
group and
number
Press FMEMORY while the MEMORY
indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected.
A1:FM 88.9 MHz
The displayed station has been stored as A1.
cleared when you store a new station under the same preset
station number.
the station frequency.
Flashes
MEMORY
TUNED