Yamaha RX-V463 Owner's Manual page 75

■ Audio select
C)AUDIO SELECT
Use this feature to designate the default audio input jack
select setting for the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
3 OPTION MENU
C)AUDIO SELECT
>AUTO
p [
[ ]/[ ]:Select
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select "LAST" if you want this unit to automatically
select the last input mode used for the connected input
source (see page 34).
■ Parameter initialization
Use this feature to set all the parameters of the sound field
programs to the initial factory settings.
Choices: NO, YES
3 OPTION MENU
D)PARAM. INI
>NO
p [
[ ]/[ ]:Select
[ENTER]:Return
• Select "NO" to cancel the parameter initialization and
return to the previous menu screen.
• Select "YES" and press 8 ENTER to set all the sound
field parameters to the initial factory settings.
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize the sound field program parameters.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
"MEMORY GUARD" is set to "ON".
LAST
D)PARAM. INI
YES
■ Bluetooth setting
3 OPTION MENU
E)BLUETOOTH SET
START PAIRING
[ENTER]:Enter
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-10, sold separately) with
your Bluetooth component. For details about the pairing,
refer to "Pairing the Bluetooth™ adapter and your
Bluetooth component" on page 59.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
Press 8 ENTER to start pairing.
1
The connected Bluetooth adapter starts searching
Bluetooth components. "Searching..." appears in the
video monitor.
2
Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
"YBA-10 YAMAHA" (example) appears in the
Bluetooth device list.
3
Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
"0000" on the Bluetooth component.
Once this unit completes the pairing successfully,
"Pairing completed" appears.
y
To cancel the pairing, press 9 RETURN to exit from
"START PAIRING".
Press 9 RETURN to exit from "START
4
PAIRING".
Notes
• If the connected Bluetooth adapter cannot find any Bluetooth
components, "Not found" appears.
• If a Bluetooth adapter is not connected to this unit, "No
Bluetooth Adapter" appears.
SET MENU
E)BLUETOOTH SET
71
En