Warranty - Mutable Instruments Warps User Manual

When you are all set, play the firmware update file into the module. While the module receives data, the color of the ALGORITHM knob will
reflect signal level - green or yellow is fine, red is too high! You can use the Carrier amplitude (D) knob to adjust the input gain.
In case the signal level is too weak, the LEDs will blink in red. Press the INT. OSC button and retry with a correct gain. If this does not help,
please retry the procedure from another computer/audio interface, and make sure that no piece of equipment (equalizer, FX processor) is
inserted in the signal chain.

WARRANTY

This product is covered by Mutable Instruments' warranty, for one year following the date of manufacture. This warranty covers any defect in the
manufacturing of this product. This warranty does not cover any damage or malfunction caused by incorrect use - such as, but not limited to,
power cables connected backwards, excessive voltage levels, or exposure to extreme temperature or moisture levels.
The warranty covers replacement or repair, as decided by Mutable Instruments. Please contact our customer service (support@mutable-
instruments.net) for a return authorization before sending the module. The cost of sending a module back for servicing is paid for by the
customer.
Mutable Instruments encourages modding and hacking, but we will not service modified units or provide any assistance in the realization of
mods.