Speakers - Yamaha RX V2095RDS Owner's Manual

Speakers

Use speakers with the specified impedance shown on the rear of this unit.
Right
Center speaker
Subwoofer system
How to Connect:
Connect the SPEAKERS terminals to your speakers with the
wire of the proper gauge (keep as short as possible). If the
connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct. That is the + and – markings are observed. If these
wires are reversed, the sound will be unnatural and lack bass.
Red: positive (+)
Black: negative (–)
2
1
3
Front effect speakers
Left
CENTER FRONT
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
A
COUPLER OUTPUT
MAIN CENTER FRONT REAR
( SURROUND )
PRE MAIN
OUT IN
B
SUB
WOOFER
Right
Main speakers B
Loosen the knob.
Insert the bare wire.
[Remove approx. 5mm
(1/4") insulation from
the speaker wires.]
Tighten the knob and
secure the wire.
Rear speakers
Right
Left
SPEAKERS
REAR
( SURROUND )
MAIN
A
CENTER : 4 MIN. / SPEAKER
FRONT : 6 MIN. / SPEAKER
REAR : 6 MIN. / SPEAKER
MAIN A OR B: 4 MIN. / SPEAKER
A B : 8 MIN. / SPEAKER
CENTER : 8 MIN. / SPEAKER
FRONT : 8 MIN. / SPEAKER
REAR : 8 MIN. / SPEAKER
B
MAIN A OR B: 8 MIN. / SPEAKER
A B : I 6 MIN. / SPEAKER
SET BEFORE POWER ON
IMPEDANCE SELECTOR
Left
Caution
Do not let the bare speaker wires touch each other or any
metal part of this unit. This could damage this unit or the
speakers, or both.
PREPARATION
Right
Main speakers A
Left
21