Yamaha RX V2095RDS Owner's Manual page 20

PREPARATION
Connecting to DOLBY DIGITAL RF output of the DVD/LD/CD combi-player
If your DVD/LD/CD combi-player has a DOLBY DIGITAL RF
signal output terminal, connect it to this unit's
SIGNAL input terminal. Audio signals of an LD source encoded
with the Dolby Digital are input to this unit by this connection.
* To play back an LD source with the Dolby Digital decoded,
set the input mode of DVD/LD to "AUTO" or "D.D.RF".
(Refer to page 37 for details.)
It is also necessary to connect the DVD/LD/CD combi-player to
this unit's analog audio signal input terminals regardless of the
DOLBY DIGITAL RF signal connection. This is for playing back
a source with Dolby Pro Logic Surround decoded or in normal
stereo (or monaural).
18
DIGITAL RF
DVD/LD/CD
combi-player
DOLBY DIGITAL
RF OUT
AUDIO SIGNAL
PHONO
1
CD
3
AM
ANT
IN
( PLAY )
TAPE/MD
GND
4
OUT
( REC )
FM
MAIN
ANT
75
UNBAL.
SURROUND
GND
EXTERNAL
DECODER
INPUT
SUB WOOFER
DIGITAL
RF SIGNAL
DVD/LD CD CD
COAXIAL
You must also connect the optical digital signal output terminal
of the DVD/LD/CD combi-player to the OPTICAL DVD/LD
digital signal input terminal of this unit.
This connection is necessary for playing back a DVD source
with Dolby Digital or DTS decoded, and playing back an LD
source with DTS decoded.
Note
DOLBY DIGITAL RF audio input signal cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
back on the DVD/LD/CD combi-player, it must be connected to
the OPTICAL digital audio signal input terminal and analog
audio signal input terminals of this unit.
DIGITAL OUT
(Europe model)
AUDIO SIGNAL
DVD/LD
TV/DBS
IN
VCR 1
OUT
IN
VCR 2
OUT
CENTER
OPTICAL
IN OUT
TAPE/MD DVD/LD TV/DBS
(PLAY) (REC)
DIGITAL SIGNAL