Yamaha RX V2095RDS Owner's Manual page 58

BASIC OPERATION
Notes
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
The value of each speaker output level you set the last time
will remain memorized even when this unit is in the standby
mode.
However, if the power cord is disconnected for more than
one week, these values will be automatically changed to the
factory default settings.
56
Speakers
CENTER
RIGHT SURROUND (R SUR.)
LEFT SURROUND (L SUR.)
FRONT
SUBWOOFER (SWFR)
Control range (dB)
MIN, –20 to +10
MIN, –20 to +10
MIN, –20 to +10
MIN, –20 to +10
MIN, –20 to 0
If the function "1A. CENTER SP" in the SET MENU mode is
set in the "NONE" position, the center speaker output level
cannot be adjusted. This is because, in this mode, the
center sound is automatically output from the left and right
main speakers.
When one of the DSP programs No. 1 to 7 is selected, the
center speaker output level cannot be adjusted.
When
DSP
front effect speaker output level cannot be adjusted.
Preset value
0
0
0
0
0
is not illuminated on the display, the