Help; Preset Selection; Advanced Mode (Double Arrow) Button - Arturia Phaser BI-TRON User Manual

Table of Contents

5.1.6. Help

The Help section in this menu allows direct access to the User Manual (the document you

are reading), as well as to the FAQ (Frequently Asked Questions).

The Preset browser [p.31]

filter, name field and left / right arrows in the toolbar all assist with preset selection.

Selecting a preset is performed by clicking the preset name field in the Upper Toolbar. That

action will open a list with all the presets available. The currently selected preset is marked

with a √. Then simply place the mouse over the name of the preset you want to select (the

preset name will be highlighted), and click it.

Alternatively, you may use the Preset Forward and Backward arrows (the arrows at the

right of the preset name field) to navigate through all the presets.

This button opens the Advanced Mode control panel. This is where the controls are located

for the extra features Arturia added to expand the possibilities regularly found on these

units.

When the Advanced Mode panel is opened, the arrows point up. When the panel is closed,

the arrows point down.

When there are parameters active in the Advanced Mode panel (edited or set to values

different than the defaults), and that panel is not visible (i.e., closed), the double arrow button

(pointing down) has a dot next to it to call your attention to those parameters. To check them,

click the button to open the Advanced Mode control panel.

There's a detailed explanation of all the features in this Advanced Mode in the

Control Panel [p.24]

can be opened by clicking the library symbol on the toolbar. The

section of the Control Panel chapter.

Arturia - User Manual Phaser BI-TRON - USER INTERFACE

Advanced

Table of Contents