User Interface; The Upper Toolbar; Save Preset - Arturia Phaser BI-TRON User Manual

5. USER INTERFACE

The Phaser BI-TRON User Interface has a Main Control Panel, an Advanced Mode Control
Panel, and toolbars in the top and bottom of the window.
It is still a very simple User Interface. That will always be the main focus of every Arturia
product: to unleash your creativity while remaining easy to use.
We already looked at the control panels. Now it's time to look at the toolbars.

5.1. The Upper Toolbar

The plug-in GUI (Graphical User Interface) has the usual Arturia toolbar that runs across the
top edge, with the Arturia logo / plug-in name on the left (the colored part), followed by the
Library button and the Preset name, with arrows to navigate through the different presets
stored in the library.
After this, we have the button that gives access to the Advanced Mode control panel (a
double arrow).
A dot is added next to this double arrow button whenever the Advanced Mode is active (i.e.,
when there are parameters set to non-default values) if that panel is not visible.
This upper toolbar, which is common to all current Arturia plug-ins, gives access to many
important functions.
These can be found by clicking on the Arturia Phaser BI-TRON button at the top left-hand
corner of the plug-in window. Since these options are also common to all current Arturia
plug-ins, they may be already familiar to you:

5.1.1. Save Preset

This option will overwrite the active preset with any changes you have made, so if you
want to keep the source preset also, use the Save As option instead. See the next section for
information about this.
26 Arturia - User Manual Phaser BI-TRON - USER INTERFACE