Mix; R.inv. (Right Invert) 1/2 - Arturia Phaser BI-TRON User Manual

4.4.3. Mix

Mix is a Dry/Wet control. We have one control for each of the two engines, which means we
can have different Dry/Wet mixes in each engine. Default is 50%, but range goes from 0%
(Dry signal only) to 100% (Wet signal only).

♪: By using different Dry/Wet values for each engine, some interesting results can be achieved.

4.4.4. R.INV. (Right Invert) 1/2

The R.INV. buttons allow to choose to invert the right channel polarity of each (or both) of the
LFOs. So we have these switches to right invert (R.INV.) LFO 1 and right invert (R.INV.) LFO 2
for Phasor A and Phasor B in the advanced panel. By inverting one of the sides of the LFO
while using, for example, a ramp waveform, you can get interesting stereo effects.
This is true even if the original signal input is mono (by using Phaser BI-TRON in a mono-to-
stereo configuration), but will not be available on the Mono version of the plug-in.
Arturia - User Manual Phaser BI-TRON - PHASER BI-TRON CONTROL PANEL 25