SHIMMING (EXCEPT FOR USA AND CANADA)
SHIMMING (EXCEPT FOR USA
AND CANADA)
NOTE:
•
There is no need to select shims when
reassembling with the original case and
inner parts.
•
Shim calculations are required when
reassembling with the original inner parts
and a new case.
•
Measurements and adjustments are
required when replacing an inner part(s).
SELECTING THE PINION SHIMS
1. Measure:
Measurement (Mv3)
O
Digital caliper:
90890-06704
NOTE:
Measure the thickness (Mv3) of the bearing
and washer.
2. Calculate:
Pinion shim thickness (T3)
O
Pinion shim thickness:
(T3) = 6.05 - Mv3 mm
3. Select:
Pinion shim
O
Calculated numeral
more than
1.13
1.20
Available shim thickness:
1.13 and 1.20 mm
44
Shim
or less
1.20
1.13
1.30
1.20