Advertisement
Click to enlarge
video window
Please remember to press "Apply"
after change settings, otherwise the
settings won't take effect.
The first step is to set the zones according to your environment. The controls are separated
in Zone Area and Zone Settings as indicated above.
Zone Settings
Rotate Mode: this is the default mode. When you click inside the "Zone Area", you can
rotate, move, and resize the zone by holding the "change points".
Click and hold inside
the zone to move the
block
Zone Area
Zone
Settings
Click in side the zones to
activate edit mode
7
BU-3026-IVS People Counting Setup Guide
Click and hold the
change points to rotate
or resize the zones.
Advertisement
