Advertisement
Statistic Chart Display: When enabled, it will show the counting result in a statistic
graph. It is not recommended to turn on this function as it might use a lot of CPU
resource which can influence counting performance. If you use this function, please
remember to turn it off after finish using it.
Event Action
The camera's objection counting function not only can do counting, it can also perform
certain action when event conditions are met. For example; it can be set if the number of
people counted exceeds100 in the last 10 minutes, it will send an email to the operator.
This can be used for crowd management.
Example:
Setting if the number of people exceeds 100 people in 10 minutes between 7am to 9pm,
the camera will sound a voice message "Number of people exceeded. Please send more
personnel to serve the customers".
1. Please make sure BU-3026-IVS is connected to external speaker.
2. Please record a voice message on your PC using Windows Sound Recorder, then save
the voice file. The format should be 8 KHz mono .wav file. The file size should be less
than 100KB.
3. Go to the camera's UI, and then select "Configuration->Audio". Check "Enable Speaker".
Click on "Browse" to select the audio file you want to record. Then select "Upload". After
upload finished, please press the "Apply" button to save settings.
BU-3026-IVS People Counting Setup Guide
12
Advertisement
