Download Print this page

Advertisement

Quick Links

BU-3028-IVS
People Counting
Guide
Version 1.0

Advertisement

loading

Summary of Contents for Ovislink Air Live BU-3028-IVS

  • Page 1 BU-3028-IVS People Counting Guide Version 1.0...
  • Page 2 BU-3028-IVS People Counting Setup Guide BU-3028-IVS People Counting Guide 1. Overview The BU-3028-IVS has built-in video analytic function for object counting. It is a standalone function built into the camera’s firmware without the need for external software or device. The object counting function can be used to count people or cars. This guide will focus on using BU-3028-IVS’s “Object Counting”...
  • Page 3: Hardware Installation Guidelines

    BU-3028-IVS People Counting Setup Guide 2. Hardware Installation Guidelines It is recommended to have at least 3 meter of vertical clearance (from floor to ceiling) for best performance. The followings are basic installation guidelines to get the best people counting results. However, the people counting function can still work in less than ideal conditions.
  • Page 4: Camera Configuration

    BU-3028-IVS People Counting Setup Guide 3. Camera Configuration 3.1 Finding camera using AirLive IP Wizard The IPCAM’s default IP address is 192.168.1.100,but this address can change when there is DHCP server (router) in your network. Therefore, please install AirLive IP Wizard to find your camera.
  • Page 5 “admin” for username and “airlive” for password. 5. After entering the correct username and password. You will enter the camera’s web configuration page. When prompted to install “Media Control” from “OvisLink Corp”, please select “Yes” to install. 3.2 Enable Camera’s Video Analytic Function Please use Internet Explorer as the default browser.
  • Page 6 BU-3028-IVS People Counting Setup Guide 2. Click on “Video” on the left menu bar and select “enable” Intelligent Video Analytics. 3.3 Setting Resolution and Frame Rate On the video page, it is important to set the resolution and frame rate correctly. Please remember to click on “Apply”...
  • Page 7 BU-3028-IVS People Counting Setup Guide 3.4 Configure Object Counting Function Please go to “Video Analytics” menu and select “Object Counting” Below is the main page for Object Counting. Zone Area Click to enlarge video window Zone Settings Please remember to press “Apply” after change settings, otherwise the settings won’t take effect.
  • Page 8: Zone Settings

    BU-3028-IVS People Counting Setup Guide Zone Settings Rotate Mode: this is the default mode. When you click inside the “Zone Area”, you can rotate, move, and resize the zone by holding the “change points”. Click in side the zones to activate edit mode.
  • Page 9 BU-3028-IVS People Counting Setup Guide Zone size is big. Zone size is too small. ※ Please extend the length of the moving path as long as possible. The length of the moving path is longer. The length of the moving path is too short. ※...
  • Page 10 BU-3028-IVS People Counting Setup Guide Zone 1 size is bigger After you set the zone area correctly, the next step is to calibrate the object size according to your installation. Calibration Your installation height and location can change the size of a person as perceived by the camera.
  • Page 11 BU-3028-IVS People Counting Setup Guide On the Zone Area, two windows label “Max Size” and “Min Size” will appear. Minimum Object Size Maximum Object Size Click inside the small box to change the size. Click on either “Min. Size” or “Max. Size” window to change the size of the maximum and minimum objects.
  • Page 12: Event Action

    BU-3028-IVS People Counting Setup Guide Counting Results Result Counter: the displayed counting result will reset to zero according to the choices. Statistic Records: Please enable this item. We recommend choose “hourly” which can report the number of counting in each hour for up to 30 days. When you choose “by minute”, the camera will hold the per-minute data for 48 hours.
  • Page 13 BU-3028-IVS People Counting Setup Guide Example: Setting if the number of people exceeds 100 people in 10 minutes between 7am to 9pm, the camera will sound a voice message “Number of people exceeded. Please send more personnel to serve the customers”. 1.
  • Page 14 BU-3028-IVS People Counting Setup Guide 5. Now, please click on “Set Event Action”. Click on “Add”. Then the following screen will appear. Please enter the data as shown below. Please remember to click on “Save” after finish settings. Note: The Event Name does not allow spaces in between words. Please enter the event name as one single word.
  • Page 15 BU-3028-IVS People Counting Setup Guide Camera Auto Send Counting Report The camera will automatically send counting report to remote FTP or File Server. This function provides great advantage for large installations because data can be uploaded via internet to a centralized server. In addition, there is no need to configure the server when there is a new camera installation.
  • Page 16 BU-3028-IVS People Counting Setup Guide Configuration Steps: Please go to the “Video Analytics”->”Object Counting” configuration page. The Statistic Record page is on the lower right side. Now check the “Statistic Record” checkbox and fill in the information...
  • Page 17 BU-3028-IVS People Counting Setup Guide Check the “Statistic Record” box Export Mode: select “Auto” Statistic Period: please choose the report format you prefer By minute: the record file will show the number of occurrence in each minute By hour: the record file will show the number of occurrence every hour. This is the recommended format to use.
  • Page 18 BU-3028-IVS People Counting Setup Guide period Which records of period will be selected. 0=Minutely 1=Hourly 2=Daily begin month-day%20 Search time begins,%20 is the html character hour:minute code of space, ex: 10-21%2012:31 month-day%20 Search time ends,%20 is the html character code of space, ex: hour:minute 10-21%2012:31 Example:...