Table of Contents
Advertisement
07
Insert a Micro SD
After inserting a micro SD card, the blue led will
be on. Please use empty microSDHC Class 10
8GB or better.
micro
SD
08
Reset the Camera to default settings
This step is not needed during the setup. But if
the camera is not responding and you want to
restore the camera to default settings. Please
press and hold the Reset/WPS button for 10
seconds,then release the button. The red led
will be off and green led will be on. After
SmartCube 300W is ready, the red led will be
on and the green led will be off.
Reseting
Reset OK
10 seconds
Advertisement
Table of Contents
