Maintenance; Protecting The Environment; Ec Declaration Of Conformity - Black & Decker BDASB18 Original Instructions Manual

ENGLISH
Battery pack will not Charger not plugged in.
charge.
Surrounding air
temperature too hot or
too cold.
Unit shuts off abruptly. Battery pack has
reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted

Maintenance

Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
♦ Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
♦ Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove any dust
from the interior.

Protecting the environment

Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood/Masonary
10
(Original instructions)
Plug charger into
a working outlet.
Move charger and
battery pack to
a surrounding air
temperature of above
40 degrees F (45 ºC) or
below 105 degrees F
(+40.5 ºC)
Allow battery pack to
cool down.
Place on charger and
allow to charge.
BDASB18
V 18
DC
Min 0 - 360/0 - 1400
-1
Nm 45
mm 1-10
mm 10/25/10
Weight
Charger
Input voltage
Output voltage
Current
Approx. charge time
Battery
Voltage
Capacity
Type
Level of sound pressure according to EN 62841:
Sound pressure (L ) 87.5 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 98.5 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into concrete (a ) 14.2 m/s
h, ID
Drilling into metal (a ) 1.1 m/s , uncertainty (K) 1.5 m/s
2
h, D

EC declaration of conformity

MACHINERY DIRECTIVE
BDASB18 - Impact drill
Black & Decker declares that these products described
under "technical data" are in compliance with: 2006/42/EC,
EN62841-1:2015 EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
Black & Decker at the following address or refer to the back
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 270 Bath Road, Slough,
kg 0.9 (with battery 1.3)
V 230 230
AC
V 18 18
DC
mA 200 400
Hours 8 3 - 5
BL1518
V 18
AC
Ah 1.5
Li-Ion
, uncertainty (K) 1.5 m/s
2 2
2
Ed Higgins
Director – Consumer Power Tools
Berkshire, SL1 4DX
United Kingdom
29/11/2019
230
18
1A
1.5