Managing The Wla-5000Ap Ethernet Adapter; How To View The Device Status; How To View The System Log - Ovislink Air Live WLA-5000AP User Manual

4. Managing the WLA-5000AP Ethernet Adapter

This Chapter covers other management aspects of your WLA-5000AP
Ethernet Adapter:

How to view the device status

How to view the system log

How to upgrade the firmware of your WLA-5000AP Ethernet Adapter
How to reset the configuration to the factory default.
How to reboot your WLA-5000AP Ethernet Adapter
What if you forgot the password
4.1 How to View the Device Status
You can monitor the system status and get general device information from the
Device Information screen:
This is at the left-bottom corner of the Device Status window.
4.2 How to View the System Log
1. Download and install Kiwi Syslog Daemon (Version 7.1.0 or above) to
syslog server.
Software Web Site - http://www.kiwisyslog.com/products.htm#syslog.
2. Login Ethernet Adapter to System Management in Advanced Settings.
3. Check "Enable Syslog".
4. Input syslog server IP address, which PC has Kiwi Syslog Daemon
software installed.
21