Table of Contents
Advertisement
Key Index: You have to specify which of the four keys will be active.
Once you enable the WEP function, please make sure that both the
WLA-5000AP ACCESS POINT and the wireless client stations use the same
key.
Note: Some wireless client cards only allow Hexadecimal digits for WEP keys.
Please note that when configuring WEP keys, a WEP128 ASCII key looks like
"This is a key"(13 characters), while a WEP128 Hex key looks like
"54-68-69-73-20-69-73-20-61-20-6b-65-79"(13 bytes).
3.2.4 Finish Setup Wizard and Save Your Settings
After stepping through the Wizard's pages, you can press the FINISH button
for your modification to take effect. This also makes your new settings saved
into the permanent memory on your system.
Note: If you change the device's IP address, as soon as you click on FINISH
you will no longer be able to communicate with your WLA-5000AP Ethernet
Adapter. You need to change your IP address and then re-boot your computer
in order to resume the communication.
3.3 Advanced Settings
The advanced settings tab on the top row of the window allows you to perform
modifications that normally you may not need to do for general operations
except changing your password from the default factory setting (this is highly
recommended for security purposes).
16
Advertisement
Table of Contents
