Dab Display Modes - JVC RA-D58B Instruction Manual

DAB Display Modes

Every time you press INFO on the unit, the display
will cycle through the following display modes.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that
the broadcaster may include with their transmissions.
The message usually includes information, such as
program details etc.
Programme Type
This describes the style of the programme that is
being broadcast.
Multiplex Name / Frequency
A multiplex is a collection of radio stations that are
bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain
stations that are specific to that area.
The frequency of the present station will be
displayed.
DAB – unlike normal radio, groups together several
radio stations and transmits them on one frequency.
Signal Error/ Signal Strength
The error is shown as a number. If the number is 0,
it means the signal received is error free and the
signal strength is strong. If the error rate is high, it
is recommended to reposition the radio aerial or
reposition the unit.
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar
will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate being
received with additional information about the audio
codec and channel configuration.
Date
This displays the current date provided automatically
by the broadcaster.
DLS
Programme Type
Multiplex Name /
Frequency
Signal Error / Signal
Strength
Bit Rate / Codec /
Channels
Date
31